11-Key mini Controller, Suitable for LED Strip Light Modulator dimming DC 5V to 24V Control Switch(Wire Connector)

Outlet & Switch Combos11-key mini controller, suitable for LED strip light modulator dimming DC 5V to 24V control switchNote: The package does not include batteries!instruct1. Dimmers and Dynamics2 8 dynamic effects3 10-level dimmers4. 256-level PWM5.Speed ​​is adjustable6.Card remote control7. Ultra-thin design8. Smooth dimming effect9. 1 to 1 pairing10.Auto save functionpictureFunction1. Power on/standbyPress this button to turn on or switch to standby mode. After turning on the machine, it will return to the state when it was turned on.2. Lighting modeSwitch from dynamic mode to lighting mode.3/8/9. Dimmer adjustment shortcut keysSwitch to 100%, 50% or 25% brightness lighting mode.4/6. Dynamic mode adjustmentSwitch from light mode to dynamic mode, or between different dynamic modes.5/7. Speed ​​adjustmentAdjust the playback speed of dynamic mode. Press SPEED+ to speed up, press SPEED- to slow down.10/11. Brightness adjustment (dimmer)Adjust lighting mode brightness. Press BRIGHT+ to increase brightness, press BRIGHT- to decrease brightness.Installing1.Power supplyThis device accepts DC 12V to 24V power supply. The red cable should be connected to the positive terminal and the black cable should be connected to the negative terminal. Please choose the appropriate power supply according to the LED application.2.LED outputThe red wire is connected to the positive pole of the LED, and the black wire is connected to the negative pole of the LED. The peak output current is 6A. Please reduce the load when the host overheats.Notice! Do not short circuit the LED output, this may cause permanent damage!3.ControlPlease unplug the insulating part before use. The remote control signal can pass through obstacles, so there is no need to aim at the host during operation. In order to receive remote control signals correctly, do not install the main unit in a closed metal part. The remote control battery is 3V CR2025, please replace only the same type of battery.4. Pair the remote controlThe remote control and the host are paired 1-to-1 by default. The host can be paired with 3 remote controls. Each remote control can be paired with any host.Please follow the steps below to pair the remote controlTurn off the power of the host and it back in after 5 seconds.After this operation, press the "Speed ​​-" and "Speed ​​+" keys simultaneously for 5 seconds, and the host will recognize the remote control.Specificationpacking listThe package does not include batteries! ! ! Please add CR2025 battery1*remote control1* receiver1* ManualWe give priority to safe and concise packaging. If you have special requirements, please communicate with our customer service staff when ordering. Thank you for your cooperation.=========Features: remote controlModel: 11 keysCertification: CE, ROHSMaterial: ABS materialmaximum. Load power: 100Product Type: DimmerOrigin: Mainland ChinaProduct type: 11-key mini remote controlInput voltage: DC 5-24VOutput voltage: DC 5-24VMaximum current: 12ARemote control signal: Remote control distance: 15 meters

• Outlet & Switch Combos